Global pages

• Home
• The institute
  • Departments
    • Energy and Environment Department
    • Chemical Processes and Nanotechnology Department
  • Location
  • Structure
  • Reports
• Online resources
• Library
  • Library Services
  • News
  • Service charter
  • PAPI
• Analysis Service
  • FUELS CHARACTERISATION SERVICE
    • Sample Preparation
    • ICP-OES Service
    • Ash Fusibility
    • Proximate and ultimate analyses, high and low heating values, and types of sulphur
    • Fuels Emissions Characterisation Service
    • Forms
  • Solid Characterisation Service
    • Thermal Analysis
    • Textural Characterisation
    • X-Ray Diffraction
    • Raman and infrared spectroscopy
    • X-Ray Photoelectron Spectroscopy (XPS)
    • Analysis Application Forms
  • Microscopy
    • Microscopy Service
    • Forms
• Management
  • Electronic office
    • Facturación electrónica – Proveedores ICB
    • Gestión económica
    • Stays at ICB
  • Extranet
    • Formularios
    • Higiene y seguridad
  • Fondos de la Unión Europea
• Site map
• Legal advice

Research Group pages

• Advanced Chemical Processes Group
• Environmental Research Group
  • Research Activities
  • Equipment
  • GUESTS
• Separation and Detection Group
  • Equipment
• Combustion and Gasification Group
  • Research lines
    • Chemical Looping Combustion (CLC)
    • Chemical Looping Reforming (CLR)
    • Combustion/Gasification in fluidized bed reactors
    • Hot gas cleaning
    • Oxy-fuel combustion
  • Facilities
    • Batch reactors
    • Materials characterization
    • Materials preparation
    • On-line gas analysis
    • Pilot Plants
• Fuels Conversion Group
  • Equipment
  • Research Lines
• Structured Materials for Catalytic Applications Group
  • Research lines
  • Equipment
• Nanochemistry Group
  • Equipment
• Carbon Nanostructures and Nanotechnology (G-CNN)
  • Research Lines
  • Visits
  • Equipment
  • Other activities

Communications

• Kinetic Study for the Co-Pyrolysis of Lignocellulosic Biomass and Plastics Using the Distributed Activation Energy Model
• Chemical and mechanical stability of CuO-based materials fo Ca/Cu reforming process and kinetic study of CuO-based promising material
• Performance of optimized CO2 solid sorbents for hydrogen production by sorption-Enhanced Reforming (SER) in fluidised bed reactor
• Application of mayenite supported Ni-catalysts suitable for Sorption-Enhanced Reforming processes
• Study of reforming catalyst with Ca-sorbents for sorption enhanced reforming coupled to ca/Cu chemical loop
• Development of synthetic Ca-based CO2 sorbents for sorption enhanced reforming coupled to Ca/Cu chemical loop
• Catalysts for Sorption Enhanced Steam-Methane Reforming coupled to Ca/Cu looping process
• Estabilidad química y mecánica de materiales con alto contenido en cobre y estudio cinético de un material prometedor para el proceso Ca/Cu
• Promoting the enhancement of bio-oil deoxygenation by metal cation impregnation of hierarchical ZSM-5 zeolites
• Catalysts for sorption enhanced reforming with oxidation/reduction cycles
• Evaluation of mayenite supported Ni-catalysts suitable for SER processes
• Catalysts for sorption enhanced reforming with oxidation/reduction cycles
• Study of CuO-Based Materials for Ca/Cu reforming process
• Sorption enhanced methane reforming in a fluidized bed reactor using a CaO-based synthetic sorbent and a Ni/NiAl2O4 catalyst
• Process modelling of a Ca-looping postcombustion CO2 capture system including a highly stable sorbent activity by recarbonation
• Valorización de neumáticos fuera de uso por pirólisis: rendimiento y propiedades de los productos usando un reactor de tipo auger
• Efecto de las propiedades ácidas estructurales de zeolitas ZSM-5 jerarquizadas en el proceso de craqueo catalítico para la valorización de bio-aceites
• Development of high performance CO2 solid sorbents combined with reforming catalyst for hydrogen production using Sorption-Enhanced Reforming
• Evaluation of a combined CaO-based sorbent and catalyst on H2 production, via Sorption enhanced Methane Steam Reforming
• Estudio del comportamiento de materiales de alto contenido en cobre
• Mejora catalítica de biocombustibles líquidos obtenidos a partir de la pirólisis de biomasa lignocelulósica
• Estudio del comportamiento conjunto en lecho fluidizado de distintos sólidos en el proceso S.E.R.
• Influencia de las condiciones de calcinación en el proceso de producción de H2 mediante reformado de CH4 con captura de CO2 in situ
• Calcium Looping with enhanced sorbent performance: experimental testing in a large pilot plant
• Total oxidation of VOCs in vanadia-promoted platinum-alumina catalysts: influence of the order of impregnation
• Effects of metal loadings in ZSM-5 for hydrogen abatement
• Effect of different cations in ZSM-5 zeolite in the catalytic upgrading of bio-oil
• Receptor modeling for source apportionment of particle bounded polycyclic aromatic hydrocarbons at an urban location in Spain
• BAP impact assessment using a modified version of CMAQ model over Zaragoza (Spain)
• Catalizadores de niquel soportados sobre UVM-7 para reformado mejorado de metano en lecho fijo
• Reformado mejorado de metano en lecho fijo con captura in situ de CO2: desarrollo experimental
• Using WRF-CMAQ air quality modelling system to estimate BaP concentrations over Zaragoza (Spain)
• Producción de hidrógeno mediante reformado mejorado con vapor de gas natural
• Obtención de biocombustibles mejorados a partir de co-pirólisis de biomasa y neumático fuera de uso
• Sorption enhanced steam methane reforming in fixed bed using NiO/NiAl2O4 as catalysts
• Evaluación del proceso de pirólisis de neumáticos fuera de uso en continuo y a escala piloto
• Source apportionment of airborne PAH in an urban environment
• Estudio de las fuentes antropogénicas de los hidrocarburos aromáticos policíclicos (PAH) asociados a la materia particulada atmosférica PM10 en Zaragoza
• Modeling of the Cu oxidation in adibatic fixed-bed reactor with N2 recycle
• BaP (PAH) source apportionment air quality impact study in Zaragoza area (Spain) by using WRF-CMAQ modelling system
• BaP air quality modelling simulation using CMAQ air quality modelling system
• BaP simulations including gas/particle partitioning and degradation into the WRF-CMAQ system
• Process simulation of Ca-looping processes: review and guidelines
• Process design of a hydrogen production process for power generation based on a Cu-Ca chemical loop
• High activity catalysts for the total oxidation of naphthalene based on mesoporous ceria modified with low levels of copper
• Production and characterization of biofuels by co-pyrolysis of biomass and waste tyres
• Estudio de catalizadores basados en níquel para producción de hidrógeno en proceso de reformado mejorado de metano
• Diseño de un nuevo proceso de producción de H2 integrado con un ciclo combinado
• Utilización de herramientas de simulación molecular en el diseño de un sólido Fe-H-ZSM-5 y su aplicación en el control de emisiones en el arranque en frío
• Aplicación de catalizadores soportados sobre NiAl2O4 en el proceso de reformado mejorado de metano
• Molecular simulation design of a multisite solid for the abatement of cold start emissions
• CuHZSM-5 as hydrocarbon trap under cold-start conditions
• Nature and sources of particle associated polycyclic aromatic hydrocarbons (PAH) in the atmospheric environment of an urban area
• BAP (PAH) air quality modelling exercise over Zaragoza (Spain) using an adapted version of WRF-CMAQ model
• Abatement of hydrocarbons by acid ZSM-5 and BETA zeolites under cold-start conditions
• Molecular simulation of exhaust mixtures in exchanged MFI zeolites
• Simulation tools development for zero emissions in polycyclic aromatic hydrocarbons at coal power stations
• Optimizacion energética del proceso de reformado de metano con captura in situ de CO2
• Desarrollo de las propiedades texturales de CMK-3 mediante activación con CO2
• Application of receptor models to apportion airborne PM10 in Spain
• Influence of natural and anthropogenic sources on PM10 air concentrations in Spain
• Carcinogenic character of airborne PM10 regarding PAH in Spanish areas. Influence of the meteorological conditions
• Characterization of the main pollution sources of airborne PM10 in episodes of potential negative impact for human health
• DEVELOPMENT OF A REACTOR MODEL FOR AN OXYFUEL COMBUSTION CALCINER APPLIED TO Ca-LOOPING SYSTEMS
• Demonstrating the concept of post-combustion CO2 capture with CaO. Progress in the “CaOling” project
• Synergy between tungsten and palladium supported on titania for the catalytic total oxidation of propane
• Polycyclic Aromatic Hydrocarbons Adsorption on Activated Carbons with Temperature Swing Desorption: Simulation of the Cyclic Process under Different Conditions
• Application of a complex particle model to pyrolysis. Comparison of different feedstock: plastic, tire, coal and biomass
• Thermal Optimisation of a sorption enhanced reforming plant
• Modelling the continuous calcination of CaCO3 under CFBC oxy-fuel conditions
• Experimental development of a Cu/Ca cycle for energy/Hydrogen generation
• Status of the technology and next steps towards large scale demonstration
• Water effect on HC retention by four zeolites under cold start conditions
• Simulating the adsorption of propene-toluene mixture in MFI type zeolites
• Propene adsorption on different zeolites and silicoaluminophosphates under cold start conditions
• Steam hydration for sorbent regeneration in Ca-looping processes. Activities at CSIC
• Scaling up postcombustion CO2 capture with CaO. Progress in the “La Pereda” 1.7 MWt pilot
• Integration of a calcium looping system for CO2 capture in existing power plants
• Postcombustion CO2 capture with CaO. Status of the technology and next steps towards large scale demonstration
• Feasibility study of forest woodchips in a moving bed reactor
• Synthesis, characterization and reactivity of Au, Pd and Au-Pd supported on an ordered carbon
• Characterization of PM10-bound polycyclic aromatic hydrocarbons in the ambient air of Aragón (Spain)
• Adsorción de propeno en sólidos inorgánicos porosos. Modelado de la adsorción en equilibrio y dinámica
• Adsorción de hidrocarburos en condiciones de arranque en frío en zeolita beta soportada sobre monolitos de cordierita
• Energy integration of a CO2 capture system in existing power plants
• Hydrogen Production from natural gas with CO2 capture by combining Ca and Cu chemical loops
• Integration of a calcium looping system for CO2 capture in exisiting power plants
• Assessment of the air quality of Zaragoza (Spain) regarding polycyclic aromatic hydrocarbons based on recent studies
• Integración energética de una planta de captura de CO2 con CaO en una central térmica existente.
• Simulación y optimización de la producción de carbones activados procedentes de neumáticos fuera de uso para la adsorción de hidrocarburos aromáticos policíclicos
• Ciclos de adsorción/regeneración de hidrocarburos aromáticos policíclicos en carbones activados procedentes de neumático fuera de uso: simulación del proceso y validación experimental
• Biomass pyrolysis in an auger reactor: scaling up to a mobile plant
• Comportamiento de un sorbente sintético y un catalizador de Níquel bajo condiciones S.E.R. en un lecho fluidizado
• VALORIZACIÓN DE BIOGÁS MEDIANTE DESCOMPOSICIÓN CATALÍTICA PARA LA PRODUCCIÓN DE GAS DE SÍNTESIS Y BIO-NANOFIBRAS DE CARBONO
• SYNTHESIS AND APPLICATIONS OF NANOSTRUCTURED CARBON MATERIALS PRODUCED BY CATALYTIC DECOMPOSITION OF HYDROCARBONS FOR APPLICATION IN ENERGY CONVERSION AND STORAGE PROCESSES
• STRUCTURAL DIFFERENCES BETWEEN FEW-LAYER GRAPHENE OXIDE SUSPENSIONS OBTAINED FROM CARBON NANOUBES AND FISHBONE NANOFIBERS
• Síntesis y caracterización electroquímica de materiales híbridos basados en nanofibras de carbono recubiertas de sulfuro d emolibdeno
• Relación entre la morfología de las partículas de catalizador y el tipo de nanofilamentos de carbono producidos en la descomposición de biogás
• Pt-Sn supported catalyst for ethanol oxidation reaction in acid media
• Pt-Ru electrocatalysts for CO and methanol oxidation supported on carbon nanofibers: Influence of synthesis methods on activity
• Productos grafénicos de la oxidación química de nanofibras de carbono de tipo fishbone
• Polyindole/carbon-supported iron phthalocyanine as oxygen reduction catalyst for microbial fuel cells
• Palladium-nickel catalysts as multi-functional electrodes for alkaline temperature fuel cells. Electrolysis & Fuel cell Discussions
• Nitrogen-doped nanostructured carbons for Methanol Fuel Cells
• Nitrogen-doped carbon materials as catalysts supports for the electro-oxidation of methanol
• N-doped Carbon Materials as Zero Platinum Catalyst for Oxygen Reduction in PEMFCs
• Methanol tolerant PtCrCo catlysts supported on mesoporous carbon for the cathode of DMFC
• Mejora de bio-oils en agua supercritica con catalizadores de NiCo soportados en nanofibras de carbono
• Materiales compuestos a base de nanofibras y xerogeles de carbono como soporte de electrocatalizadores
• Materiales carbonosos nanoestructurados y su aplicación en Pilas de Combustible
• Influencia de la relación Fe/Mo en catalizadores para la obtención de nanotubos de carbono con distinta distribución de diámetros
• Influence of thermal treatments on the stability of Pd nanoparticles supported on graphitised ordered mesoporous carbons
• Influence of the gas hour space velocity on the activity of monolithic catalysts for the simultaneous removal of soot and NOx
• Influence of the alumina precursor on the activity of structured Fe¿K/Al2O3 catalysts towards the simultaneous removal of soot and NOx
• Incremento de la actividad y durabilidad de catalizadores de Pt en la reducción de oxígeno mediante el empleo de xergoeles de carbono dopados con nitrógeno como soportes de electrocatalizadores
• H2-rich gases production from biogas. Viability of the process associated to the co-production of high added value carbon nanofibers
• GRAPHENE OXIDE OBTENTION FROM MULTI-WALL CARBON NANOTUBES WITH DIFFERENT STRUCTURAL CHARACTERISITCS
• Graphene oxide as superior catalyst support for heterogeneous catalysis
• Few-layer graphene oxide by chemical oxidation of multiwall carbon nanotubes
• EVOLUCIÓN DEL GRADO DE OXIDACIÓN DEL GRAFENO DE POCAS CAPAS OBTENIDO DE NANOTUBOS QUÍMICAMENTE OXIDADOS
• Estudio electroquímico en medio ácido y básico de catalizadores Pt/Ru soportados en carbón mesoporoso ordenado dopado con Nitrógeno
• Estudio cinético de la oxidación electroquímica de CO y metano sobre catalizadores de Pd-Ni soportados sobre diferentes materiales carbonosos
• Energías de activación de las oxidaciones electroquímicas de CO y metanol sobre catalizadores de Pt-Ru soportados sobre nanofibras de carbono: influencia en la eficiencia de celdas de combustible de metanol directo
• Desarrollo de catalizadores bimetálicos Ni-Co para su uso en la descomposición catalítica de biogás
• Comportamiento electroquímico de materiales de carbono nanoestructurado. Aplicación en el proceso de electrorreducción de CO2.
• Comportamiento electroquímico de materiales de carbono mesoporoso ordenado
• Catalytic valorization of biogas to produce H2-rich gases and carbon nanofibers. Operation in a fluidized bed reactor to simulate a continuous process
• Catalytic upgrading of vacuum residue through partial oxidation in supercritical water
• Catalytic decomposition of biogas: a novel approach for biogas valorisation into syngas and bio-carbon nanofibers
• Carbon xerogels as support for electrocatalysts
• Carbon Nanofilaments (CNF&MWCNT) supported Ni-MoS2 as heavy oil hydroprocessing catalysts
• Carbon Nanofibers as catalytic support for application at the positive electrode of metal-air batteries
• Carbon-based catalysts: Synthesis and applications
• Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibers
• A novel electrochemical reactor for CO2 conversion in gas phase
• A novel electrochemical reactor for CO2 conversion in gas phase.
• A kinetic study about the CO and metham¡nol electrochemical oxidation of Pd-Ni catalyst

Chapters

• Calcium looping reactor design for fluidized-bed systems
• The Catalytic Oxidation of Hydrocarbon Volatile Organic Compounds
• BAP (PAH) Source Apportionment Air Quality Impact Study in Zaragoza area (Spain) by using WRF-CMAQ modelling system
• Carcinogenic character of airborne PM10 regarding PAH in Spanish areas. Influence of the meteorological conditions
• Influence of natural and anthropogenic sources on PM10 air concentrations in Spain
• Cobalt Oxide, Co3O4, As A Catalyst For Environmental Applications
• Characterization of the main pollution sources of airborne PM10 in episodes of potential negative impact for human health
• The Catalytic Oxidation of Hydrocarbon Volatile Organic Compounds
• Novel carbon materials modified with heteroatoms as metal-free catalyst and metal catalyst support
• Functionalization strategies for single-walled carbon nanotubes integration into epoxy matrices
• CAPITULO IV. Nanotubos de carbono: estructura, propiedades y química
• CAPÍTULO I. Carbones activados
• Automated Multiple Development

Work supervisions

• Producción de hidrógeno con captura in situ de CO2 mediante nuevos ciclos de reformado Ca-Cu
• Producción y caracterización de biocombustibles mediante pirolisis de biomasa. Análisis de ciclo de vida.
• Obtención de carbón activado a partir de neumáticos usados mediante incorporación de calcio y sus aplicaciones en procesos de adsorción
• Desarrollo de tecnologías de concentración y eliminación de hidrocarburos aromáticos policíclicos. Producción de carbones activados, adsorción cíclica y combustión catalítica
• Comportamiento de CaO como sorbente regenerable de CO2
• Optimization of nanostructured materials for hydrocarbon abatement during the cold-start period of gasolina vehicles
• Simulación del proceso de captura de CO2 mediante los ciclos de carbonatación/calcinación de CaO integrado en plantas de producción de energía
• Waste tire valorization by pyrolysis: production and application of the products
• Producción de hidrógeno con captura in situ de CO2 mediante reformado mejorado de metano
• Producción de biocombustibles de segunda generación a partir de biomasa de origen lignocelulósico
• Obtención de combustibles mediante la pirolisis de plásticos de desecho
• PRODUCCIÓN DE BIOCOMBUSTIBLES DE SEGUNDA GENERACIÓN A PARTIR DE BIOMASA DE ORIGEN LIGNOCELULÓSICO
• PRODUCCIÓN DE HIDRÓGENO CON CAPTURA IN SITU DE CO2 MEDIANTE REFORMADO MEJORADO DE METANO
• Desarrollo de sorbentes de CO2 sintéticos de base cálcica: síntesis, caracterización y determinación de las cinéticas de reacción
• Estudio de la mezcla de catalizador NiO/CaAl2O4 con sorbente sintético CaO/MgO en el reformado de metano con ciclo Ca/Cu
• Catalizadores de metales impregnados sobre sílice mesoporosa para reformado de metano con ciclos de oxidación-reducción
• Desarrollo de catalizadores de Ni/Mayenita adecuados para el proceso de reformado mejorado de CH4 con captura in situ de CO2
• Óxidos metálicos nanoestructurados para aplicaciones energéticas
• Mejora catalítica de biocombustibles líquidos obtenidos a partir de la pirólisis de biomasa lignocelulósica
• Preparación de catalizadores basados en nanopartículas de oro soportadas sobre óxido de cerio mesoporoso ordenador para eliminación de CO
• waste tire valorization by pyrolysis: production and application of the products
• Optimization of nanostructured materials for hydrocarbon abatement during the cold-start period of gasoline vehicles
• Simulación del proceso de captura de CO2 mediante los ciclos de carbonatación/calcinación de CaO integrados en plantas de producción de energía.
• Síntesis, caracterización y aplicación de zeolitas CuHZSM-5 con porosidad jerarquizada para su uso como trampa de hidrocarburos durante el arranque en frío de motores
• Producción de materiales nanoestructurados para el control de emisiones evaporativas
• Producción y caracterización de caombustibles líquidos a partir de la co-pirólisis de biomasa y neumáticos fuera de uso
• Producción de materiales compuestos, carbón activado/TiO2, para su uso como fotocatalizador en la reducción de emisiones evaporativas
• sintesis de catalizadores basados en cu para la produccion de H2 mediante reformado de CH4 con vapor con captura in situ de CO2 mediante sorbentes cálcicos
• Evaluación, preparación y selección de sólidos para el proceso de reformado de metano con captura de CO2 in situ
• Comportamiento de CaO como sorbente regenerable para la captura de CO2
• Producción y caracterización de biocombustibles mediante pirólisis de biomasa. Análisis de ciclo de vida
• OBTENCIÓN DE CARBÓN ACTIVADO A PARTIR DE NEUMÁTICOS USADOS MEDIANTE LA INCORPORACIÓN DE CALCIO Y SU APLICACIÓN EN PROCESO DE ADSORCIÓN
• Desarrollo de tecnologías de concentración y eliminación de hidrocarburos aromáticos policíclicos. Producción de carbones activados, adsorción cíclica y combustión catalítica
• Combustión de la fracción volátil obtenida en la pirólisis de neumáticos fuera de uso
• Optmización energética del proceso de reformado de metano con captura de CO2
• Modelado de trampas de hidrocarburos aplicadas en el arranque en frío de vehículos de gasolina
• Aplicación de herramientas de simulación molecular al estudio de biocombustibles
• Nanofilamentos de carbono obtenidos mediante descomposición catalítica de corrientes ricas en metano como precursores de materiales grafénicos
• Nanotubos de Carbono: Producción por láser y caracterización
• Nanotubos de carbono funcionales
• Nanotubos de Carbono: Estructura porosa y sus implicaciones en el campo de la energía
• Crecimiento de nanotubos de carbono sobre substratos por CVD térmico
• Materiales Compuestos de Polianilina y Nanotubos de carbono
• Obtención de nanotubos de carbono por el sistema de pirólisis-CVD
• Materiales compuestos de polianilina y nanotubos de carbono: funcionalidad y procesado
• Integration of single-walled carbon nanotubes in polymeric matrices through tailored functionalization
• Desarrollo de materiales avanzados basados en nanotubos de carbono y grafeno: nanocomposites poliméricos reforzados y nanohíbridos catalíticos
• Synthesis and Integration of Carbon Nanotubes and Graphene Oxide into Hetero-Nanostructures for Energy Storage and Biomaterial applications
• Tesis doctorales
• Xerogeles de carbono como soporte de electrocatalizadores para pilas de combustible
• Óxidos metálicos nanoestructurados para aplicaciones energéticas
• Catalizadores de metales impregnados sobre sílice mesoporosa para reformado de metano con ciclos de oxidación-reducción
• Desarrollo de catalizadores de Ni/Mayenita adecuados para el proceso de reformado mejorado de CH4 con captura in situ de CO2
• Mejora catalítica de biocombustibles líquidos obtenidos a partir de la pirólisis de biomasa lignocelulósica
• Preparación de catalizadores basados en nanopartículas de oro soportadas sobre óxido de cerio mesoporoso ordenador para eliminación de CO
• waste tire valorization by pyrolysis: production and application of the products
• Optimization of nanostructured materials for hydrocarbon abatement during the cold-start period of gasoline vehicles
• Simulación del proceso de captura de CO2 mediante los ciclos de carbonatación/calcinación de CaO integrados en plantas de producción de energía.
• Síntesis, caracterización y aplicación de zeolitas CuHZSM-5 con porosidad jerarquizada para su uso como trampa de hidrocarburos durante el arranque en frío de motores
• Producción de materiales nanoestructurados para el control de emisiones evaporativas
• Producción y caracterización de caombustibles líquidos a partir de la co-pirólisis de biomasa y neumáticos fuera de uso
• Producción de materiales compuestos, carbón activado/TiO2, para su uso como fotocatalizador en la reducción de emisiones evaporativas
• sintesis de catalizadores basados en cu para la produccion de H2 mediante reformado de CH4 con vapor con captura in situ de CO2 mediante sorbentes cálcicos
• Evaluación, preparación y selección de sólidos para el proceso de reformado de metano con captura de CO2 in situ
• Producción y caracterización de biocombustibles mediante pirólisis de biomasa. Análisis de ciclo de vida
• Comportamiento de CaO como sorbente regenerable para la captura de CO2
• OBTENCIÓN DE CARBÓN ACTIVADO A PARTIR DE NEUMÁTICOS USADOS MEDIANTE LA INCORPORACIÓN DE CALCIO Y SU APLICACIÓN EN PROCESO DE ADSORCIÓN
• Desarrollo de tecnologías de concentración y eliminación de hidrocarburos aromáticos policíclicos. Producción de carbones activados, adsorción cíclica y combustión catalítica
• Combustión de la fracción volátil obtenida en la pirólisis de neumáticos fuera de uso
• Optmización energética del proceso de reformado de metano con captura de CO2
• Modelado de trampas de hidrocarburos aplicadas en el arranque en frío de vehículos de gasolina
• Aplicación de herramientas de simulación molecular al estudio de biocombustibles
• Desarrollo de catalizadores para la reducción de CO2 a productos de alto valor añadido en un reactor electroquímico.
• Catalizadores para la eliminación simultánea de NOx y hollín en las emisiones de motores diesel.
• Valorización de biogás mediante descomposición catalítica para la producción de gas de síntesis y nanofibras de carbono
• Descomposición catalítica de gas natural para la producción de hidrógeno y carbono

Resources

• Process modelling of ca-looping systems integrated in energy conversions systems
• ¿qué hacer con los neumáticos usados?
• ICB. Estudio de las concentraciones de Benzo(a)pireno en el aire
• Materiales carbonosos para un uso eficiente de la energía en dispositivos electroquímicos
• Video “Combustibles fósiles: ¿los malos de la película?”

News

• Combustion and Gasification Research Group: i-LINK project meeting at CanmetENERGY in Ottawa.
• Jose Miguel Gonzalez Awarded Carbon on the Periodic Table of Younger Chemist IUPAC
• PhD thesis defence: Hydrogen production with inherent CO2 capture through novel Ca/Cu enhanced reforming cycles
• El óxido de grafeno, solución verde para fabricar dispositivos optoelectrónicos
• No es oro todo lo que reluce … ni grafeno todo lo que conduce
• Incluciencia se traslada al Colegio Ntra Sra del Carmen Zaragoza.
• Jesus Acapulco (Univ. Oxford, UK) visit our group
• Incluciencia: primera actividad de 2018 en colegio calasancio de Zaragoza
• Project INCLUCIENCIA to motivate students through science activities
• 2018 Japanese-European EnEx Workshops エクセレンスの実現
• 10alamenos9
• International Summer School on “Carbon and related nanomaterials: Synthesis, characterisation and properties”
• RAMAN DAY 2018.
• José Miguel González selected to attend the first CHEMPUBSOC EUROPE YOUNG RESEARCHERS MEETING
• Ramón Murillo appears in the newspaper Heraldo de Aragón related to a new method for solid residues treatment
• Alberto Veses Premio Extraordinario de Doctorado 2016-2017
• Pilar Gayán in the news “¿Buscas referentes? Aquí tienes a seis científicas potentes, actuales y españolas”
• The Environmental Research Group has appeared in the TV program “En ruta con la ciencia” of Aragón Televisión
• Conferencia en el ICB: Monitoring the integration process of individual single-walled carbon nanotubes into sensing devices
• Manuela Meloni (Univ. Sussex) visit the G-CNN group
• 7thFP Project Meeting “SUCCESS” February 23-24, 2017
• Dr. Pilar Gayán, one representative of Combustion and Gasification Group, is one of the most influential Spanish researchers in the world
• Defensa Tesis Doctoral: Producción de biocombustibles de segunda generación a partir de biomasa de origen lignocelulósico (Production of second generation biofuels from lignocellulosic biomass)
• 2016 Highly Cited Researchers
• 2015 Highly Cited Researchers
• Doctoral Thesis: Captura de CO2 en la combustión de carbón con transportadores sólidos de oxígeno
• Doctoral Thesis: Nanofilamentos de carbono obtenidos mediante descomposición catalítica de corrientes ricas en metano como precursores de materiales grafénicos

Events

• International Summer School on “Carbon and related nanomaterials: Synthesis, characterisation and properties”
• 2018 Japanese-European EnEx Workshops エクセレンスの実現
• 10alamenos9
• Presentación del stand del Instituto de Carboquímica en la Semana de la Ciencia del CSIC 2016
• Organización de las Jornadas conmemorativas del 25 Aniversario del Grupo Español del Carbón
• Producción de negro de carbón y otros productos mediante pirolisis de NFU
• Thermochemical processes for CO2 valorization
• Stand del Instituto de Carboquímica en la Semana de la Ciencia
• Simulación del proceso de captura de CO2 mediante los ciclos de carbonatación/calcinación de CaO integrado en plantas de producción de energía
• Simulación del proceso de captura de CO2 mediante los ciclos de carbonatación/Calcinación de CaO integrado en plantas de producción de energía
• Process modelling of a Ca-looping postcombustion CO2 capture system including a highly stable sorbent activity by recarbonation
• Exposición del Instituto de Carboquímica
• El problema de la contaminación atmosférica y las soluciones planteadas desde el Grupo de Investigaciones Medioambientales
• Exposición sobre el Instituto de Carboquímica
• El problema de la contaminación atmosférica y las soluciones planteadas desde el Grupo de Investigaciones Medioambientales
• Tecnología de pirólisis aplicada a la valoración de residuos
• Exposición del Instituto de Carboquímica
• Stand del Instituto de Carboquímica en la Semana de la Ciencia en Aragón
• Control de contaminantes orgánicos en sistemas de generación de energía estacionarios y móviles
• Stand del Instituto de Carboquímica
• Control de contaminantes orgánicos en sistemas de generación de energía estacionarios y móviles

Articles

• Understanding the role of Ti-rich domains in the stabilization of gold nanoparticles on mesoporous silica-based catalysts
• Prediction of elemental composition, water content and heating value of upgraded biofuel from the catalytic cracking of pyrolysis bio-oil vapors by infrared spectroscopy and partial least square
• Photocatalytic Activity of Mesoporous α-Fe2O3 Synthesized via Soft Chemistry and Hard Template Methods for Degradation of Azo Dye Orange II
• Determination of the oxidation kinetics of high loaded CuO-based materials under suitable conditions for the Ca/Cu H2 production process
• Low temperature total oxidation of toluene by bimetallic Au-Ir catalysts
• Development of Synthetic Ca-based CO2 Sorbents for Sorption Enhanced Reforming Coupled to Ca/Cu Chemical Loop
• Development of Cost Effective and High Performance Composite for CO2 Capture in Ca-Cu Looping Process
• Determining Bio-Oil Composition via Chemometric Tools Based on Infrared Spectroscopy
• Catalyst evaluation for high-purity H2 production by sorption-enhanced steam-methane reforming coupled to a Ca/Cu process
• Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature
• Electronic interactions in illuminated carbon dots/MoS2 ensembles and electrocatalytic activity towards hydrogen evolution
• Conjugated Polymer Nanoparticle-Graphene Oxide Charge-Transfer ComplexesAdvanced Functional Materials
• Control of microstructure and surface chemistry of graphene aerogels via pH and time manipulation in hydrothermal method
• Percolating Metallic Structures Templated on Laser-deposited Carbon Nanofoams derived from Graphene Oxide: Applications in Humidity Sensing
• Self-Assembled Core-Shell CdTe/Poly(3-hexylthiophene) Nanoensembles as Novel Donor-Acceptor Light-Harvesting Systems
• Dielectric behavior and electrical conductivity of PVDF filled with functionalized single-walled carbon nanotubes
• Utilization of calcium acetate and calcium magnesium acetate for H2S removal in coal gas cleaning at high temperatures
• Use of Hopcalite-Derived Cu-Mn Mixed Oxide as Oxygen Carrier for Chemical Looping with Oxygen Uncoupling Process
• Use of chemically and physically mixed iron and nickel oxides as oxygen carriers for gas combustion in a CLC process
• Use of Chemical-Looping processes for coal combustion with CO2 capture
• Use of an Fe-based residue from alumina production as an oxygen carrier in chemical-looping combustion
• Una aproximación al modelado de la cinética de desactivación de superficies catalíticas heterogéneas
• Transport velocities of coal and sand particles
• Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels
• The use of ilmenite as oxygen-carrier in a 500Wth Chemical-Looping Coal Combustion unit
• The performance in a fixed bed reactor of copper-based oxides on titania as oxygen carriers for chemicel looping combustion of methane
• Theoretical approach on the CLC performance with solid fuels: Optimizing the solids inventory
• The fate of sulphur in the Cu-based Chemical Looping with Oxygen Uncoupling (CLOU) Process
• The fate of mercury in fluidized beds under oxy-fuel combustion conditions
• The effect of the porous structure on sorbent sulfation under coal-fired boiler conditions
• The 3rd International Conference on Chemical Looping 2014
• The 2nd International Conference on Chemical Looping 2012
• Testing of a highly reactive impregnated Fe 2O 3/Al 2O 3 oxygen carrier for a SR-CLC system in a continuous CLC unit
• Temperature variations in the oxygen carrier particles during their reduction and oxidation in a chemical-looping combustion system
• Tar abatement in a fixed bed catalytic filter candle during biomass gasification in a dual fluidized bed
• Tar abatement for clean syngas production during biomass gasification in a dual fluidized bed
• Synthesis gas generation by chemical-looping reforming using a Ni-based oxygen carrier
• Synthesis gas generation by chemical-looping reforming in a batch fluidized bed reactor using Ni-based oxygen carriers
• Syngas/H2 production from bioethanol in a continuous chemical-looping reforming prototype
• Syngas combustion in a chemical-looping combustion system using an impregnated Ni-based oxygen carrier
• Syngas combustion in a 500 Wth Chemical-Looping Combustion system using an impregnated Cu-based oxygen carrier
• Sulphur retention in circulating fluidized bed coal combustion. Modelling and simulation
• Sulphur, nitrogen and mercury emissions from coal combustion with CO2 capture in chemical looping with oxygen uncoupling (CLOU)
• Sulphuric acid production via Chemical Looping Combustion of elemental sulphur
• Sulfur retention in an oxy-fuel bubbling fluidized bed combustor: Effect of coal rank, type of sorbent and O2/CO2 ratio
• Sulfur retention in AFBC. Modelling and sorbent characterization methods
• Sulfur release during the devolatilization of large coal particles
• Study of modified calcium hydroxides for enhancing SO2 removal during sorbent injection in pulverized coal boilers
• Steam, dry, and steam-dry chemical looping reforming of diesel fuel in a 1 kWth unit
• Sorbent characterization for boiler injection process
• : Some intrinsec kinetics equations and deactivation mechanisms leading to deactivation curves with a residual activity
• Solid waste management of a chemical-looping combustion plant using Cu-based oxygen carriers
• Simultaneous calcination and sulfidation of calcium-based sorbents
• Selection of oxygen carriers for chemical-looping combustion
• Residual activity of sorbent particles with a long time in a CFBC
• Relevance of the coal rank on the performance of the in situ gasification chemical-looping combustion
• Relevance of the catalytic activity on the performance of a NiO/CaAl2O4 oxygen carrier in a CLC process
• Release of pollutant components in CLC of lignite
• Regeneration of sulfided dolomite with steam and carbon dioxide
• Reduction kinetics of Cu-, Ni-, and Fe-based oxygen carriers using syngas (CO + H2) for chemical-looping combustion
• Reduction and oxidation kinetics of nickel-based oxygen-carriers for chemical-looping combustion and chemical-looping reforming
• Reduction and oxidation kinetics of a copper-based oxygen carrier prepared by impregnation for chemical-looping combustion
• Reduction and oxidation kinetics of a CaMn0.9Mg 0.1O3-δ oxygen carrier for chemical-looping combustion
• Redox kinetics of CaMg0.1Ti0.125Mn0.775O2.9- ¿ for Chemical Looping Combustion (CLC) and Chemical Looping with Oxygen Uncoupling (CLOU)
• Reactivity of a NiO/Al2O3 oxygen carrier prepared by impregnation for chemical-looping combustion
• Reactividad de semicoques de lignito con CO2. Influencia de la materia mineral
• Radial gas mixing in a fast fluidized bed
• qq | Characterization of the reactivity of limestones with SO2 in a fluidized bed reactor
• Prompt considerations on the design of Chemical-Looping Combustion of coal from experimental tests
• Progress in chemical-looping combustion and reforming technologies
• Process Comparison for Biomass Combustion: In Situ Gasification-Chemical Looping Combustion (iG-CLC) versus Chemical Looping with Oxygen Uncoupling (CLOU)
• Pollutant emissions in a bubbling fluidized bed combustor working in oxy-fuel operating conditions: Effect of flue gas recirculation
• Pirólisis del carbón V. Influencia del tipo de reactor
• Pirólisis del carbón VII. Viabilidad económica de la pirólisis
• Pirólisis del carbón VI. Estado de desarrollo de la tecnología de pirólisis
• Pirólisis del carbón IV. Desulfuración de carbones españoles con altos contenidos en azufre.
• Pirólisis del carbón III. Estrategias de utilización de los productos de pirólisis
• Pirólisis del carbón II. Cinética del proceso
• Pirólisis del carbón I. Fundamentos
• Performance of Cu- and Fe-based oxygen carriers in a 500 Wth CLC unit for sour gas combustion with high H2S content
• Performance of CLOU process in the combustion of different types of coal with CO2 capture
• Performance of a low Ni content oxygen carrier for fuel gas combustion in a continuous CLC unit using a CaO/Al2O3 system as support
• Performance of a low-cost iron ore as an oxygen carrier for Chemical Looping Combustion of gaseous fuels
• Performance of a highly reactive impregnated Fe2O 3/Al2O3 oxygen carrier with CH4 and H2S in a 500 Wth CLC unit
• Performance of a bauxite waste as oxygen-carrier for chemical-looping combustion using coal as fuel
• Performance in a fixed-bed reactor of titania-supported nickel oxide as oxygen carriers for the chemical-looping combustion of methane in multicycle tests
• Optimum temperature for sulphur retention in fluidised beds working under oxy-fuel combustion conditions
• Optimization of hydrogen production by Chemical-Looping auto-thermal Reforming working with Ni-based oxygen-carriers
• Optimization of H2 production with CO2 capture by steam reforming of methane integrated with a chemical-looping combustion system
• Optimization of a Chemical-Looping autothermal reforming system working with a Ni-based oxygen-carrier.
• Operation of a 10 kWth chemical-looping combustor during 200 h with a CuO-Al2O3 oxygen carrier
• On the use of a highly reactive iron ore in Chemical Looping Combustion of different coals
• On the attrition evaluation of oxygen carriers in Chemical Looping Combustion
• On a highly reactive Fe2O3/Al2O3 oxygen carrier for in situ gasification chemical looping combustion
• NO and N2O emissions in oxy-fuel combustion of coal in a bubbling fluidized bed combustor
• NiO/Al2O3 oxygen carriers for chemical-looping combustion prepared by impregnation and deposition-precipitation methods
• Nickel-Copper Oxygen Carriers To Reach Zero CO and H2 Emissions in Chemical-Looping Combustion
• Morphological analysis of sulfated Ca-based sorbents under conditions corresponding to oxy-fuel fluidized bed combustion
• Modelling of the flow structure in circulating fluidized beds
• Modelling of sulfur retention in circulating fluidized bed combustors
• Modelling for the high-temperature sulphation of calcium-based sorbents with cylindrical and plate-like pore geometries
• Modelling and simulation of the sulphur retention in circulating fluidized bed combustors
• Modeling of the devolatilization of nonspherical wet pine wood particles in fluidized beds
• Modeling of the Chemical-Looping Combustion of Methane using a Cu-based Oxygen Carrier
• Modeling of the chemical-looping combustion of methane using a Cu-based oxygen-carrier
• Modeling of sulphur retention in atmospheric fluidized bed combustors. Sensitivity analysis and simulation. –> DUPLICADO
• Modeling of sulphur retention in atmospheric fluidized bed combustors. sensitivity analysis and simulation
• Modeling of moving-bed coal gasifiers
• Modeling of limestone sulfation for typical oxy-fuel fluidized bed combustion conditions
• Modeling of lignite combustion in atmospheric fluidized bed combustors. 2. Model validation and simulation
• Modeling of lignite combustion in atmospheric fluidized bed combustors. 1. Selection of submodels and sensitivity analysis
• Modeling of carbon combustion efficiency in circulating fluidized bed combustors. 2. Model validation and simulation
• Modeling of carbon combustion efficiency in circulating fluidized bed combustors. 1. Selection of submodels and sensitivity analysis
• Minimum fluidization velocities of fluidized-bed coal-combustion solids
• Mineral matter effects on the reactivity of chars during gasification
• Methods for characterization of sorbents used in fluidized bed boilers
• Methane combustion in a 500 Wth chemical-looping combustion system using an impregnated ni-based oxygen carrier
• Mercury release and speciation in chemical looping combustion of coal
• Mapping of the range of operational conditions for Cu-, Fe-, and Ni-based oxygen carriers in chemical-looping combustion
• Manganese Minerals as Oxygen Carriers for Chemical Looping Combustion of Coal
• Low-cost Fe-based oxygen carrier materials for the iG-CLC process with coal. 2
• Low-cost Fe-based oxygen carrier materials for the iG-CLC process with coal. 1
• Long-lasting Cu-based oxygen carrier material for industrial scale in Chemical Looping Combustion
• La gasificación catalítica del carbón. Aspectos teóricos
• Kinetics of redox reactions of ilmenite for chemical-looping combustion
• Kinetics of H2S reaction with calcined calcium-based sorbents
• Kinetics of a lignite-char gasification by CO2
• Kinetic determination of a highly reactive impregnated Fe2O3/Al2O3 oxygen carrier for use in gas-fueled Chemical Looping Combustion
• Kinetic analysis of a Cu-based oxygen carrier: Relevance of temperature and oxygen partial pressure on reduction and oxidation reactions rates in Chemical Looping with Oxygen Uncoupling (CLOU)
• In situ gasification Chemical-Looping Combustion of coal using limestone as oxygen carrier precursor and sulphur sorbent
• Innovative Oxygen Carriers Uplifting Chemical-looping Combustion
• Influence of limestone addition in a 10 kWth chemical-looping combustion unit operated with petcoke
• Impregnated CuO/Al2O3 oxygen carriers for chemical-looping combustion: Avoiding fluidized bed agglomeration
• Ilmenite as oxygen carrier in a Chemical Looping Combustion system with coal
• Ilmenite activation during consecutive redox cycles in chemical-looping combustion
• Identification of operational regions in the Chemical-Looping with Oxygen Uncoupling (CLOU) process with a Cu-based oxygen carrier
• Hydrogen production with CO2 capture by coupling steam reforming of methane and chemical-looping combustion: Use of a iron-based waste product as oxygen carrier burning a PSA tail gas
• Hydrogen production by chemical-looping reforming in a circulating fluidized bed reactor using Ni-based oxygen carriers
• Hydrogen production by auto-thermal chemical-looping reforming in a pressurized fluidized bed reactor using Ni-based oxygen carriers
• Hot coal-gas desulfurization with calcium-based sorbents in a pressurized moving-bed reactor
• High temperature behaviour of a CuO/γAl2O3 oxygen carrier for chemical-looping combustion
• H2S retention with Ca-based sorbents in a pressurized fixed-bed reactor: Application to moving-bed design
• H2S removal in entrained flow reactors by injection of Ca-based sorbents at high temperatures
• Gasificación del carbón II. Reactividad de carbones
• Gasificación del carbón. Fundamentos del proceso
• Gasificación de carbón en reactores de lecho móvil. Parte I. Modelado del gasificador
• Gasificación de carbón en reactores de lecho móvil. Parte II. Diseño y simulación del gasificador.
• Gasificación catalítica del carbón: actividad catalítica en la gasificación de un semicoque de lignito con CO2
• Fuel reactor model validation: Assessment of the key parameters affecting the chemical-looping combustion of coal
• Fuel reactor modelling in chemical-looping combustion of coal: 2-simulation and optimization
• Fuel reactor modelling in chemical-looping combustion of coal: 1. model formulation
• Fluidodinámica en combustores de carbón de lecho fluidizado.
• Factors affecting the thermogravimetric technique in the characterization of sorbents for AFBC
• Factors affecting the H2S reaction with noncalcined limestones and half-calcined dolomites
• Evaluation of the use of different coals in Chemical Looping Combustion using a bauxite waste as oxygen carrier
• Evaluation of Manganese minerals for Chemical Looping Combustion
• Evaluation of Manganese Minerals for Chemical Looping Combustion
• Evaluation of a Spray-Dried CuO/MgAl2O4 Oxygen Carrier for the Chemical Looping with Oxygen Uncoupling Process
• Evaluation of a highly reactive and sulfur resistant synthetic Fe-based oxygen carrier for CLC using gaseous fuels
• Energy exploitation of acid gas with high H2S content by means of a chemical looping combustion system
• Effect of temperature and flue gas recycle on the SO2 and NOx emissions in a oxy-fuel fluidised bed combustor
• Effect of support on the behavior of Cu-based oxygen carriers during long-term CLC operation at temperatures above 1073 K
• Effect of support on reactivity and selectivity of Ni-based oxygen carriers for chemical-looping combustion
• Effect of pressure on the sulfidation of calcined calcium-based sorbents
• Effect of pressure on the behavior of copper-, iron-, and nickel-based oxygen carriers for chemical-looping combustion
• Effect of pore geometry on the sintering of Ca-based sorbents during calcination at high temperatures
• Effect of operating conditions in Chemical-Looping Combustion of coal in a 500W th unit
• Effect of operating conditions and H2S presence on the performance of CaMg0.1Mn0.9O3-δ perovskite material in chemical looping combustion (CLC)
• Effect of moisture content on devolatilization times of pine wood particles in a fluidized bed
• Effect of H 2S on the behaviour of an impregnated NiO-based oxygen-carrier for chemical-looping combustion (CLC)
• Effect of Gas Impurities on the Behavior of Ni-based Oxygen Carriers on Chemical-Looping Combustion
• Effect of gas composition in Chemical-Looping Combustion with copper-based oxygen carriers: Fate of sulphur
• Effect of gas composition in Chemical-Looping Combustion with copper-based oxygen carriers: Fate of light hydrocarbons
• Effect of fuel gas composition in chemical-looping combustion with Ni-based oxygen carriers. 2. Fate of light hydrocarbons
• Effect of fuel gas composition in chemical-looping combustion with ni-based oxygen carriers. 1. fate of sulfur
• Effect of formulation of steady-state heat balance for char particles on AFBC modelling
• Effect of Fe-olivine on the tar content during biomass gasification in a dual fluidized bed
• Effectiveness of natural, commercial, and modified calcium-based sorbents as H2S removal agents at high temperatures
• Direct sulfidation of half-calcined dolomite under pressurized conditions
• [D] Factors affecting the H2S reaction with noncalcined limestones and half-calcined dolomites
• Development of (Mn0.77Fe0.23)2O3 particles as an oxygen carrier for coal combustion with CO2 capture via in-situ gasification chemical looping combustion (iG-CLC) aided by oxygen uncoupling (CLOU)
• Development of CuO-based oxygen carrier materials suitable for Chemical-Looping with Oxygen Uncoupling (CLOU) process
• Development of Cu-based oxygen carriers for Chemical-Looping with Oxygen Uncoupling (CLOU) process
• Development of Cu-based oxygen carriers for chemical-looping combustion
• Determination of coal combustion reactivities by burnout time measurements in a batch fluidized bed
• Determination of biomass char combustion reactivities for FBC applications by a combined method
• Design and operation of a coal-fired 50 kWth chemical looping combustor
• Design and operation of a 50 kWth Chemical Looping Combustion (CLC) unit for solid fuels
• Demonstration of chemical-looping with oxygen uncoupling (CLOU) process in a 1.5kW th continuously operating unit using a Cu-based oxygen-carrier
• Coupled drying and devolatilisation of non-spherical wet pine wood particles in fluidised beds
• Conceptual design of a 100 MWth CLC unit for solid fuel combustion
• Comparison of mechanistic models for the sulfation reaction in a broad range of particle sizes of sorbents
• Combustion of wood chips in a CFBC. Modeling and validation
• Combustion and reforming of ethanol in a chemical looping continuous unit
• Coal combustion in a 50 kWth Chemical Looping Combustion unit: Seeking operating conditions to maximize CO2 capture and combustion efficiency
• CO2 capture by chemical looping combustion | Captura de CO2 mediante transportadores sólidos de oxígeno
• Circulating fluidised bed co-combustion of coal and biomass
• Cinética de gasificación de un semicoque de lignito con H2
• Chemical-looping combustion using syngas as fuel
• Chemical Looping Combustion of liquid fossil fuels in a 1 kWth unit using a Fe-based oxygen carrier
• Chemical looping combustion in a 10 kWth prototype using a CuO/Al2O3 oxygen carrier: Effect of operating conditions on methane combustion
• Chemical-looping Combustion CO2 Ready Gas Power
• Characterization study and five-cycle tests in a fixed-bed reactor of titania-supported nickel oxide as oxygen carriers for the chemical-looping combustion of methane
• Characterization of a sol-gel derived CuO/CuAl2O4 oxygen carrier for chemical looping combustion (CLC) of gaseous fuels: Relevance of gas-solid and oxygen uncoupling reactions
• Characterization of a limestone in a batch fluidized bed reactor for sulfur retention under oxy-fuel operating conditions
• Characterization for disposal of Fe-based oxygen carriers from a CLC unit burning coal
• Characterization and performance in a multicycle test in a fixed-bed reactor of silica-supported copper oxide as oxygen carrier for chemical-looping combustion of methane
• Catalytic activity of ni-based oxygen-carriers for steam methane reforming in chemical-looping processes
• Carbon efficiency in atmospheric fluidized bed combustion of lignites
• CAPTURA DE CO2 MEDIANTE TRANSPORTADORES SÓLIDOS DE OXÍGENO
• Calcium-based sorbents behaviour during sulphation at oxy-fuel fluidised bed combustion conditions
• Calcination of calcium-based sorbents at pressure in a broad range of CO2 concentrations
• Calcination of calcium acetate and calcium magnesium acetate: effect of the reacting atmosphere
• Biomass combustion with CO2 capture by chemical looping with oxygen uncoupling (CLOU)
• Biomass combustion in a CLC system using an iron ore as an oxygen carrier
• Bioethanol combustion with CO2 capture in a 1kWth Chemical Looping Combustion prototype: Suitability of the oxygen carrier
• Behaviour of a bauxite waste material as oxygen carrier in a 500Wth CLC unit with coal
• Behavior of ilmenite as oxygen carrier in chemical-looping combustion
• Axial voidage profiles in fast fluidized beds
• Autothermal chemical looping reforming process of different fossil liquid fuels
• Assessment of technological solutions for improving chemical looping combustion of solid fuels with CO2 capture
• A model for prediction of carbon combustion efficiency in circulating fluidized bed combustors
• Electrochemical behavior of hybrid carbon nanomaterials: the chemistry behind electrochemistry
• Validation of the H2 production stage via SER under relevant conditions for the Ca/Cu reforming process practical application
• Total oxidation of VOCs on mesoporous iron oxide catalysts: Soft chemistry route versus hard template method
• Promoting Deoxygenation of Bio-Oil by Metal-Loaded Hierarchical ZSM-5 Zeolites
• An integrated process for the production of lignocellulosic biomass pyrolysis oils using calcined limestone as a heat carrier with catalytic properties
• Review and research needs of Ca-Looping systems modelling for post-combustion CO2 capture applications
• Experimental study of the application of a NiO/NiAl2O4 catalyst and a CaO-based synthetic sorbent on the Sorption Enhanced Reforming process
• Performance of a combined CaO-based sorbent and catalyst on H2 production, via sorption enhanced methane steam reforming
• Production of upgraded bio-oils by biomass catalytic pyrolysis in an auger reactor using low cost materials
• Insights into the catalytic production of hydrogen from propane in the presence of oxygen: Cooperative presence of vanadium and gold catalysts
• Study of a residential boiler under start-transient conditions using a tire pyrolysis liquid (TPL)/diesel fuel blend
• Porosity-Acidity Interplay in Hierarchical ZSM-5 Zeolites for Pyrolysis Oil Valorization to Aromatics
• Total oxidation of propane in vanadia-promoted platinum-alumina catalysts: Influence of the order of impregnation
• Catalytic upgrading of biomass derived pyrolysis vapors over metal-loaded ZSM-5 zeolites: Effect of different metal cations on the bio-oil final properties
• In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions: A mini-review
• Enhanced H2O2 production over Au-rich bimetallic Au-Pd nanoparticles on ordered mesoporous carbons
• The prevalence of surface oxygen vacancies over the mobility of bulk oxygen in nanostructured ceria for the total toluene oxidation
• Evaluation of process variables on the performance of Sorption Enhanced Methane Reforming
• High-temperature stable gold nanoparticle catalysts for application under severe conditions: The role of TiO2 nanodomains in structure and activity
• Performance and emissions of an automotive diesel engine using a tire pyrolysis liquid blend
• Catalytic pyrolysis of wood biomass in an auger reactor using calcium-based catalysts
• Potential for using a tire pyrolysis liquid-diesel fuel blend in a light duty engine under transient operation
• Determination of CaO carbonation kinetics under recarbonation conditions
• Design of a novel fluidized bed reactor to enhance sorbent performance in CO2 capture systems using CaO
• Source apportionment of atmospheric PM2.5-bound polycyclic aromatic hydrocarbons by a PMF receptor model. Assessment of potential risk for human health
• Au deposited on CeO2 prepared by a nanocasting route: A high activity catalyst for CO oxidation
• Modeling of Cu oxidation in an adiabatic fixed-bed reactor with N2 recycling
• Undesired effects in the determination of CO2 carrying capacities of CaO during TG testing
• Thermodynamic analysis for syngas production from volatiles released in waste tire pyrolysis
• Bifunctional Cu/H-ZSM-5 zeolite with hierarchical porosity for hydrocarbon abatement under cold-start conditions
• Process design of a hydrogen production plant from natural gas with CO2 capture based on a novel Ca/Cu chemical loop
• Co-pyrolysis of biomass with waste tyres: Upgrading of liquid bio-fuel
• Source apportionment of the carcinogenic potential of polycyclic aromatic hydrocarbons (PAH) associated to airborne PM10 by a PMF model
• Calcium Looping with Enhanced Sorbent Performance: Experimental Testing in a Large Pilot Plant
• Shape-dependency activity of nanostructured CeO2 in the total oxidation of polycyclic aromatic hydrocarbons
• Total oxidation of naphthalene using bulk manganese oxide catalysts
• Influence of the preparation method on the activity of ceria zirconia mixed oxides for naphthalene total oxidation
• Abatement of hydrocarbons by acid ZSM-5 and BETA zeolites under cold-start conditions
• Study of nickel catalysts for hydrogen production in sorptionenhanced reforming process
• BETA zeolite thin films supported on honeycomb monoliths with tunable properties as hydrocarbon traps under cold-start conditions
• Integrated combined cycle from natural gas with CO2 capture using a Ca-Cu chemical loop
• The different catalytic behaviour in the propane total oxidation of cobalt and manganese oxides prepared by a wet combustion procedure
• Hydrogen production through sorption enhanced steam reforming of natural gas: Thermodynamic plant assessment
• Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor
• Modeling of Cu oxidation in adiabatic fixed-bed reactor with N2 recycling in a Ca/Cu chemical loop
• Nature and sources of particle associated polycyclic aromatic hydrocarbons (PAH) in the atmospheric environment of an urban area.
• Waste tyre pyrolysis – A review
• Modelling the continuous calcination of CaCO3 in a Ca-looping system
• Study of nickel catalysts for hydrogen production in sorption enhanced reforming process
• Fuel properties of tire pyrolysis liquid and its blends with diesel fuel
• Influence of organic and inorganic markers in the source apportionment of airborne PM10 in Zaragoza (Spain) by two receptor models
• CuH-ZSM-5 as hydrocarbon trap under cold start conditions
• Design of a hydrogen production process for power generation based on a Ca-Cu chemical loop
• Reduction kinetics of a high load Cu-based pellet suitable for Ca/Cu chemical loops
• Application of a particle model to pyrolysis. comparison of different feedstock: Plastic, tyre, coal and biomass
• Simulation and optimization of tyre-based steam activated carbons production for gas-phase polycyclic aromatic hydrocarbons abatement
• Total oxidation of VOCs on Au nanoparticles anchored on Co doped mesoporous UVM-7 silica
• CO 2 capture from cement plants using oxyfired precalcination and/ or calcium looping
• Kinetics of calcination of partially carbonated particles in a Ca-looping system for CO 2 capture
• Synergy between tungsten and palladium supported on titania for the catalytic total oxidation of propane
• High activity mesoporous copper doped cerium oxide catalysts for the total oxidation of polyaromatic hydrocarbon pollutants
• Conceptual design of a hydrogen production process from natural gas with CO 2 capture using a Ca-Cu chemical loop
• Modelling the heat and mass transfers of propane onto a ZSM-5 zeolite
• The effect of steam on the fast carbonation reaction rates of CaO
• Post-combustion calcium looping process with a highly stable sorbent activity by recarbonation
• Oxygen defects: The key parameter controlling the activity and selectivity of mesoporous copper-doped ceria for the total oxidation of naphthalene
• Highly dispersed encapsulated AuPd nanoparticles on ordered mesoporous carbons for the direct synthesis of H 2O 2 from molecular oxygen and hydrogen
• Molecular simulation design of a multisite solid for the abatement of cold start emissions
• Apportionment of the airborne PM10 in Spain. Episodes of potential negative impact for human health
• Modeling of sorption enhanced steam methane reforming-Part II: Simulation within a novel Ca/Cu chemical loop process for hydrogen production
• Modeling of sorption enhanced steam methane reforming in an adiabatic fixed bed reactor
• Effect of the aging time of PVP coated palladium nanoparticles colloidal suspensions on their catalytic activity in the preferential oxidation of CO
• PAH in airborne particulate matter. Carcinogenic character of PM10 samples and assessment of the energy generation impact
• Postcombustion CO2 capture with CaO. Status of the technology and next steps towards large scale demonstration
• Integration of a Ca-looping system for CO2 capture in an existing power plant
• The influence of platinum addition on nano-crystalline ceria catalysts for the total oxidation of naphthalene a model polycyclic aromatic hydrocarbon
• Promoting the activity and selectivity of high surface area Ni-Ce-O mixed oxides by gold deposition for VOC catalytic combustion
• The significance of the order of impregnation on the activity of vanadia promoted palladium-alumina catalysts for propane total oxidation
• Recent solutions for the abatement of hydrocarbon emissions during the cold start of light vehicles
• Conceptual design of a three fluidised beds combustion system capturing CO2 with CaO
• Valorisation of forestry waste by pyrolysis in an auger reactor
• Integration of a Ca looping system for CO2 capture in existing power plants
• Evaluation of CO2 Carrying Capacity of Reactivated CaO by Hydration
• An analysis of the effect of carbonation conditions on CaO deactivation curves
• Analysis of a process for capturing the CO2 resulting from the Precalcination of limestone in a cement Plant
• Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route
• The effect of gold addition on the catalytic performance of copper manganese oxide catalysts for the total oxidation of propane
• Characterization of PM10-bound polycyclic aromatic hydrocarbons in the ambient air of Spanish urban and rural areas
• New CO2 capture process for hydrogen production combining Ca and Cu chemical loops
• Modelling the breakthrough curves obtained from the adsorption of propene onto microporous inorganic solids
• New CO2 Capture Process for Hydrogen Production Combining Ca and Cu Chemical Loops. ——– DUPLICADO
• Waste tyre pyrolysis: Modelling of a moving bed reactor
• Total oxidation of naphthalene using mesoporous CeO2 catalysts synthesized by nanocasting from two dimensional SBA-15 and three dimensional KIT-6 and MCM-48 silica templates
• Effect of sorbent hydration on the average activity of CaO in a Ca-looping system
• Experimental and simulated propene isotherms on porous solids
• Seasonal variation of benzo(a)pyrene in the Spanish airborne PM10. Multivariate linear regression model applied to estimate BaP concentrations
• Screening of different zeolites and silicoaluminophosphates for the retention of propene under cold start conditions
• Valorisation of waste tyre by pyrolysis in a moving bed reactor
• Stable anchoring of dispersed gold nanoparticles on hierarchic porous silica-based materials
• Carbon dioxide capture from combustion flue gases with a calcium oxide chemical loop. Experimental results and process development
• Deep oxidation of volatile organic compounds using ordered cobalt oxides prepared by a nanocasting route
• The catalytic performance of mesoporous cerium oxides prepared through a nanocasting route for the total oxidation of naphthalene
• Towards new generation fuel cell electrocatalysts based on xerogel-nanofiber carbon composites
• Towards an optimal synthesis route for the preparation of highly mesoporous carbon xerogel-supported Pt catalysts for the oxygen reduction reaction
• The role of Sn, Ru and Ir on the ethanol electrooxidation on Pt3M/TiCN electrocatalysts
• THE INFLUENCE OF CARBON NANOFIBER SUPPORT PROPERTIES ON THE OXYGEN REDUCTION BEHAVIOUR IN PROTON CONDUCTING ELECTROLYTE-BASED DIRECT METHANOL FUEL CELLS
• The effect of carbon nanofiber properties as support for PtRu nanoparticles on the electrooxidation of alcohols
• Tailoring synthesis conditions of carbon werogels towards their utilization as Pt-catalyst supports for oxygen reduction reaction (ORR)
• Tailoring carbon xerogels’ properties to enhance catalytic activity of Pt catalysts towards methanol oxidation
• Tailored synthesis of organised mesoporous aluminas prepared by non-ionic surfactant templating using a Box-Wilson CCF design
• Synthesis and application of gold-carbon hybrids as catalysts for the hydroamination of alkynes
• Sulfurized carbon xerogels as Pt support with enhanced activity for fuel cell applications
• Spectroelectrochemical study of carbon monoxide and ethanol oxidation on Pt/C, PtSn(3:1)/C and PtSn(1:1)/C catalysts
• Response to the comments on “metallic and carbonaceous-based catalysts performance in the solar catalytic decomposition of methane for hydrogen and carbon production” by A. Rollinson
• Relationship between carbon morphology and catalyst deactivation in the catalytic decomposition of biogas using Ni, Co and Fe based catalysts
• PtRu nanoparticles desposited by the sulfite complex method on highly porous carbon xerogels: effect of the thermal treatment
• Pt-Ru catalysts supported on carbón xerogels for PEM fuel cells
• Producción de hidrógeno y materiales de carbono nanoestructurados.
• Preparation of polymer composites using nanostructured carbon produced at large scale by catalytic decomposition of methane
• Platinum ruthenium catalysts supported on carbon xerogel for methanol electro-oxidation: Influence of the catalyst synthesis method
• Pd catalysts supported onto nanostructured carbon materials for CO2 valorization by electrochemical reduction
• Palladium–nickel materials as cathode electrocatalysts for alkaline fuel cells
• Palladium–nickel catalysts supported on different chemically-treated carbon blacks for methanol oxidation in alkaline media
• Palladium-based catalysts as electrodes for direct methanol fuel cells: A last ten years review
• Oxygen-functionalized highly mesoporous carbon xerogel based catalysts for direct methanol fuel cell anodes
• Oxidized carbon nanofibers supporting PtRu nanoparticles for direct methanol fuel cells
• Oxidation of CO and methanol on Pd-Ni catalysts supported on different chemically-treated carbon nanofibers
• Optimizing the synthesis of carbon nanofiber based electrocatalysts for fuel cells
• On the oxidation degree of few-layer graphene oxide sheets obtained from chemically oxidized multiwall carbon nanotubes
• On the influence of the alumina precursor in Fe-K/Al2O 3 structured catalysts for the simultaneous removal of soot and NOx: From surface properties to reaction mechanism Special issue dedicated to François G. Garin.
• On the importance of the structure in the electrical conductivity of fishbone carbon nanofibers
• On the design of Pt-Sn efficient catalyst for carbon monoxide and ethanol oxidation in acid and alkaline media
• Noble metal-free catalysts supported on carbon for CO2 electrochemical reduction
• Ni-MoS2 supported on carbon nanofibers as hydrogenation catalysts: Effect of support functionalisation
• Ni-Co bimetallic catalysts for the simultaneous production of carbon nanofibres and syngas through biogas decomposition
• NANOESTRUCTURED CARBON MATERIALS AS SUPPORTS IN THE PREPARATION OF DIRECT METHANOL FUEL CELL ELECTROCATALYSTS
• Methanol tolerant Pt2CrCo catalysts supported on ordered mesoporous carbon for the cathode of DMFC
• Methanol oxidation at diamond-supported Pt nanoparticles: Effect of the diamond surface termination
• Metallic and carbonaceous -based catalysts performance in the solar catalytic decomposition of methane for hydrogen and carbon production
• Me (Cu, Co, V)-K/Al2O3 supported catalysts for the simultaneous removal of soot and nitrogen oxides from diesel exhausts
• Investigation of several graphite-based electrodes for vanadium redox flow cell
• Influence of the synthesis method in the methanol electrooxidation at Pt carbon supported electrodes studied by a new DEMS configuration
• Influence of the synthesis method for Pt catalysts supported on highly mesoporous carbon xerogel and vulcan carbon black on the electro-oxidation of methanol
• Influence of the surface potassium species in Fe-K/Al2O3 catalysts on the soot oxidation activity in the presence of NOx
• Influence of the supports characteristics and their functionalization on the catalytic activity of Pt-Ru catalysts for PEM fuel cells
• Influence of thermal treatments on the stability of Pd nanoparticles supported on graphitised ordered mesoporous carbons
• Influence of the nature of the carbon support on the activity of Pt/C catalysts for ethanol and carbon monoxide oxidation
• Influence of the inherent metal species on the graphitization of methane-based carbon nanofibers
• Influence of the Alumina Precursor on the Activity of Structured Fe–K/Al2O3 Catalysts Towards the Simultaneous Removal of Soot and NOx
• Influence of the alkali promoter on the activity and stability of transition metal (Cu, Co, Fe) based structured catalysts for the simultaneous removal of soot and NOx
• Influence of support’s oxygen functionalization on the activity of Pt/carbon xerogels catalysts for methanol electro-oxidation
• Influence of gas hourly space velocity on the activity of monolithic catalysts for the simultaneous removal of soot and NOx
• Hydrogen production by catalytic decomposition of methane using a Fe-based catalyst in a fluidized bed reactor
• Hydrogen and multiwall carbon nanotubes production by catalytic decomposition of methane: Thermogravimetric analysis and scaling-up of Fe-Mo catalysts
• Highly dispersed encapsulated AuPd nanoparticles on ordered mesoporous carbons for the direct synthesis of H 2O 2 from molecular oxygen and hydrogen
• Graphitized carbon nanofibers for use as anodes in lithium-ion batteries: Importance of textural and structural properties
• Graphene quantum dots from fishbone carbon nanofibers
• Gas diffusion electrodes for metanol electrooxidation studied by a new DEMS configuration: influence of the diffusion layer
• Fuel cell performance of Pt electrocatalysts supported on carbon nanocoils
• Ethanol Oxidation on Sn-modified Pt Single-Crystal Electrodes: New Mechanistic Insights from On-line Electrochemical Mass Spectrometry
• Enhanced oxygen reduction activity and durability of Pt catalysts supported on carbon nanofibers
• Electrochemical reactors for CO2 reduction: From acid media to gas phase
• Electrochemical performance of low temperature PEMFC with surface tailored carbon nanofibers as catalyst support
• Electrochemical oxidation of CO and methanol on Pt-Ru catalysts supported on carbon nanofibers: The influence of synthesis method
• Electrocatalytic properties of strained Pd nanoshells as Au nanostructures: CO and HCOOH oxidation
• Electrocatalysts for low temperature fuel cells
• Efficiency and emissions in a vehicle spark ignition engine fueled with hydrogen and methane blends
• Effect of the synthesis conditions of Ni/Al2O3 catalysts on the biogas decomposition to produce H2-rich gas and carbon nanofibers
• Effect of the dendrimer generation used in the synthesis of Pt-Ru nanoparticles supported on carbon nanofibers on the catalytic activity towards methanol oxidation
• Effect of Metal Loading in NiMo/Al2O3 Catalysts on Maya Vacuum Residue Hydrocracking
• Effect of Carbon Supports on Electrocatalytic Reactivity of Au_pd Core-shell Nanoparticles
• Comparative study of Pt catalysts supported on different high conductive carbon materials for methanol and ethanol oxidation
• CH4 and CO2 partial pressures influence and deactivation study on the Catalytic Decomposition of Biogas over a Ni catalyst
• Cesium as alkali promoter in Me-Cs (Me=Cu,Co,Fe)/Al2O3 structured catalysts for the simultaneous removal of soot and NOx
• Catalytic filters for the simultaneous removal of soot and NO x: Influence of the alumina precursor on monolith washcoating and catalytic activity
• Catalytic decomposition of biogas to produce hydrogen rich fuels for SI engines and valuable nanocarbons
• CATALYTIC DECOMPOSITION OF BIOGAS TO PRODUCE H2-RICH FUEL GAS AND CARBON NANOFIBERS. PARAMETRIC STUDY AND CHARACTERIZATION
• Catalizadores basados en Ni-MoS2 soportados en nanofibras de carbono para el hidroprocesado de fracciones pesadas de petróleo
• Carbon supports for the catalytic dehydrogenation of liquid organic hydrides as hydrogen storage and delivery systems
• Carbon nanofibres coated with Ni decorated MoS2 nanosheets as catalyst for vacuum residue hydroprocessing
• Carbon Nanofibers as Advanced Pd Catalyst Supports for the Air Electrode of Alkaline Metal-Air Batteries
• Carbon nanofiber-based counter electrodes for low cost dye-sensitized solar cells
• Carbon nanocoils as unusual electrode materials for supercapacitors
• Carbon nanocoils as catalysts support for methanol electrooxidation: A Differential Electrochemical Mass Spectrometry (DEMS) study
• Carbon monoxide and methanol oxidations on carbon nanofibers supported Pt-Ru electrodes at different temperatures
• Carbon monoxide and ethanol oxidation on PtSn supported catalysts: Effect of the nature of the carbon support and Pt:Sn composition
• Carbon-based catalysts: Synthesis and applications
• Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres
• Analysis of the strategies for bridging the gap towards the Hydrogen Economy
• Acid treated carbon nanofibers as catalytic support for heavy oil hydroprocessing
• Origin of the Excellent Performance of Ru on Nitrogen-Doped Carbon Nanofibers for CO2 Hydrogenation to CH4
• Mesoporous carbon doped with N,S heteroatoms prepared by one-pot auto-assembly of molecular precursor for electrocatalytic hydrogen peroxide synthesis
• Bio-sourced mesoporous carbon doped with heteroatoms (N,S) synthesised using one-step hydrothermal process for water remediation
• hacked by S.O.A! Str0nG was here.. @unixwar3
• Frictional and mechanical behaviour of graphene/UHMWPE composite coatings
• The effect of the thermal reduction on the kinetics of low-temperature 4He sorption and the structural characteristics of graphene oxide
• The effect of reduction temperature of graphene oxide on low temperature hydrogen sorption
• Self-assembled graphene aerogel and nanodiamond hybrids as high performance catalysts in oxidative propane dehydrogenation
• Carbon nanotube-supported gold nanoparticles as efficient catalyst for the selective hydrogenation of nitroaromatic derivatives to anilines
• A novel amperometric biosensor based on gold nanoparticles anchored on reduced graphene oxide for sensitive detection of l-lactate tumor biomarker
• The effect of the temperature of graphene oxide reduction on low-temperature sorption of 4He
• Graphene oxide nanoribbon-based sensors for the simultaneous bio-electrochemical enantiomeric resolution and analysis of amino acid biomarkers
• Graphene nanoribbon-based electrochemical sensors on screen-printed platforms
• Mesoporous carbon doped with N,S heteroatoms prepared by one-pot auto-assembly of molecular precursor for electrocatalytic hydrogen peroxide synthesis
• Electron Trap States and Photopotential of Nanocrystalline Titanium Dioxide Electrodes Filled with Single-Walled Carbon Nanotubes
• Electrical conductivity and tensile properties of block-copolymer-wrapped single-walled carbon nanotube/poly(methyl methacrylate) composites
• Peptide-based biomaterials. Linking l-tyrosine and poly l-tyrosine to graphene oxide nanoribbons
• Electrochemical Sensor for the Quantification of Dopamine Using Glassy Carbon Electrodes Modified with Single-Wall Carbon Nanotubes Covalently Functionalized with Polylysine
• Evaluation of sol-gel TiO2 photocatalysts modified with carbon or boron compounds and crystallized in nitrogen or air atmospheres
• Transparent conducting films made of different carbon nanotubes, processed carbon nanotubes, and graphene nanoribbons
• Activated carbon from cherry stones by chemical activation: Influence of the impregnation method on porous structure
• Single-walled carbon nanotubes covalently functionalized with cysteine: A new alternative for the highly sensitive and selective Cd(II) quantification
• Graphene oxide carbon nanotube hybrid assemblies: cooperatively strengthened OH…O=C hydrogen bonds and the removal of chemisorbed water
• The effect of the thermal reduction on the kinetics of low-temperature 4He sorption and the structural characteristics of graphene oxide
• Intercalated water in multi-layered graphene oxide paper: an X-ray scattering study
• Optimization of activated carbons for hydrogen storage
• Impact of synthesis conditions of KOH activated carbons on their hydrogen storage capacities
• Activated carbons doped with Pd nanoparticles for hydrogen storage
• Hydrogen uptake of high surface area-activated carbons doped with nitrogen
• Hydrogen storage in activated carbons produced from coals of different ranks: Effect of oxygen content
• Activated carbons obtained from sewage sludge by chemical activation: Gas-phase environmental applications
• A Critical Short Review of Equilibrium and Kinetic Adsorption Models for VOCs Breakthrough Curves Modelling
• Yttria stabilized zirconia corrosion destabilization followed by Raman mapping
• Platelet-like catalysts desing for high yield production of multi-walled carbon nanotubes by catalytic chemical vapour deposition
• A potentiometric titration for H2O2 determination in the presence of organic compounds
• Adsorption of toluene and toluene-water vapor mixture on almond shell based activated carbons
• Influence of activated carbon characteristics on toluene and hexane adsorption: Application of surface response methodology
• Novel methodology for gold nanoparticles deposition on carbon monolith supports
• Influence of activation atmosphere used in the chemical activation of almond shell on the characteristics and adsorption performance of activated carbons
• Mercury capture by a regenerable sorbent under oxycoal combustion conditions: Effect of SO2 and O2 on capture efficiency
• Unburnt carbon from coal fly ashes as a precursor of activated carbon for nitric oxide removal
• Denitrification of stack gases in the presence of low-rank coal-based carbons activated with steam
• Preparation and characterization of carbon-enriched coal fly ash
• Preparation and characterization of carbon-enriched coal fly ash
• Carbon-enriched coal fly ash as a precursor of activated carbons for SO2 removal
• Coal fly ash based carbons for SO2 removal from flue gases
• Tail-end Hg capture on Au/carbon-monolith regenerable sorbents
• Tail-end Hg capture on Au/carbon-monolith regenerable sorbents
• Enhancement of nitric oxide removal by ammonia on a low-rank coal based carbon by sulphuric acid treatment
• Conversion of almond shell to activated carbons: Methodical study of the chemical activation based on an experimental design and relationship with their characteristics
• Pyrrhotite deposition through thermal proyection to simulate iron sulfide slagging in oxyfuel combustion
• Toluene and n-hexane adsorption and recovery behavior on activated carbons derived from almond shell wastes
• SO2 ADSORPTION ON TYPE Y ZEOLITE SYNTHESIZED FROM COAL FLY ASH
• Nitric Oxide Removal from Flue Gases by Carbon-enriched CoalFly Ash
• Influence of temperature and regeneration cycles on Hg capture and efficiency by structured Au/C regenerable sorbents
• Influence of activated carbon characteristics on toluene and hexane adsorption: Application of surface response methodology
• Adsorption of toluene and toluene-water vapor mixture on almond shell based activated carbons
• Novel methodology for gold nanoparticles deposition on carbon monolith supports
• Effect of thermal treatments on the morphology, chemical state and lattice structure of gold nanoparticles deposited onto carbon structured monoliths
• No removal in the selective catalitic reduction process over Cu and Fe exchanged type Y zeolites synthesized from coal fly ash
• Aluminium depletion in NiCrAlY bond coatings by hot corrosion as a function of projection system
• Fabrication of Superconducting Coatings on Structural Ceramic Tiles
• Fabrication of Bi-2212 coatings using thermospraying
• Optimization of mineral carbonation process for CO2 sequestration by lime-rich coal ashes
• Influence of temperature on CO2 absorption rate and capacity in ionic liquids
• The role of limestone during fluidized bed oxy-combustion of coal and biomass
• Evidence of corrosion on metallic surfaces at 500 °c and 560 °c by metal-potassium trisulphate formation in oxy-co-combustion
• Effect of co-firing on emissions and deposition during fluidized bed oxy-combustion
• On the oxy-combustion of lignite and corn stover in a lab-scale fluidized bed reactor
• Influence of iron species present in fly ashes on mercury retention and oxidation
• Covalent functionalization of single-walled carbon nanotubes with polytyrosine: characterization and analytical applications for the sensitive quantification of polyphenols
• Electrochemical sensing of guanine, adenine and 8-hydroxy-2’deoxyguanosine at glassy carbono modified with single-walled carbono nanotubes covalently functionalized with lysine
• In-vitro toxicity of carbono nanotube/polysine colloids to colon cancer cells
• The effect of the temperature of graphene oxide reduction on low-temperature sorption of 4He
• The Effect of the Thermal Reduction Temperature on the Structure and sorption capacity of Reduced Graphene Oxide Materials
• Electrochemical behavior of hybrid carbon nanomaterials: the chemistry behind electrochemistry
• Single-walled carbon nanotubes covalently functionalized with polytyrosine: a new material for the development of NADH-based biosensors
• Revisiting Graphene Oxide Chemistry via Spatially-Resolved Electron Energy Loss Spectroscopy
• Circulating fluidized bed combustion in the turbulent regime: Modelling of carbon combustion efficiency and sulphur retention
• Function of the support and metal loading on catalytic carbon dioxide reduction using ruthenium nanoparticles supported on carbon nanofibers
• and metal loading on catalytic carbon dioxide reduction using ruthenium nanoparticles supported on carbon nanofibers
• Self-assembled graphene aerogel and nanodiamond hybrids as high performance catalysts in oxidative propane dehydrogenation
• Optimization of hydrogen production with CO2 capture by autothermal chemical-looping reforming using different bioethanol purities
• Clinical validity of bis(methylthio)gliotoxin for the diagnosis of invasive aspergillosis
• Optimizing the performance of catalytic traps for hydrocarbon abatement during the cold-start of a gasoline engine

Projects

• Enhanced Capture with Oxygen for Scrubbing CO2
• Fabricación de diboruro de magnesio a partir de precursores nanométricos o electrodeposición de Boro
• Carbonatación mineral de cenizas de escombrera para captura de CO2
• Advanced carbon materials for environmental applications: mercury capture with regenerable sorbents and enhanced NOx control. Monolitos de carbono par aplicaciones medioambientales: captura de mercurio con sorbentes regenerables
• Mercury capture with regenerable sorbents in coal oxycombustion
• Transformación de la materia mineral del carbón en oxicombustión: efecto sobre la escorificación y el ensuciamiento
• Oxicombustión conjunta de carbón y biomasa en lecho fluido. Ensuciamiento y corrosión por deposición de cenizas
• Hidroxicombustion de carbon: influencia del vapor de agua sobre la escorificacion, el ensuciamiento y la corrosion.
• FLExible Dimethyl ether production from biomass Gasification with sorption enhancED processes – FLEDGED
• GRAPEROS_GRAPH”: GRAFENO EN CÉLULAS SOLARES PEROVSKITAS Y ORGÁNICAS: TINTAS E INTERFACES DE GRAFENOS
• Producción de H2 con captura de CO2 por reformado de CH4 con transportadores sólidos de oxígeno
• Chemical Looping Combustion CO2-Ready Gas Power (CLC Gas Power)
• Carbon Dioxide Capture and Hydrogen Production from Gaseous Fuels (CACHET)
• Integration of particulate abatement, removal of trace elements and tar reforming in one biomass steam gasification reactor yielding high purity syngas for efficient CHP and power plants (UNIQUE)
• Emisión free coal combustión chemical looping process (ECLAIR)
• Innovative oxygen Carriers uplifting Chemical-Looping Combustion (INNOCUOUS)
• Captura de CO2 en la combustion de carbon con transportadores solidos de oxigeno
• Desarrollo de la combustion de carbón con captura de CO2 por el proceso de Chemical Looping con generación de oxigeno
• Mejora de la combustion de carbón con captura de CO2 por procesos de Chemical Looping
• Procedimiento y aparato de termólisis de polímeros de desecho, P201130428
• Valoración y control de la contaminación atmosférica por contaminantes orgánicos
• Desarrollo de sorbentes sintéticos para la captura de CO2 mediante ciclos de carbonatación/calcinación
• Proceso para la obtención de energía eléctrica y productos con valor añadido a partir de neumáticos fuera de uso basado en ciclos de termólisis + gasificación
• Modelización y evaluación de las concentraciones de benzo(a)pireno en el aire: aplicación al área de Zaragoza y extensión a toda la Península Ibérica
• Producción de hidrógeno a partir de hidrocarburos ligeros con captura in situ de CO2
• Desarrollo de sólidos porosos catalíticos. Diseño, producción y aplicación en el tratamiento de hidrocarburos producidos en el arranque en frío de vehículos
• Development of postcombustion CO2 capture with CaO in a large testing facility
• Biocombustibles de segunda generación mediante pirolisis catalítica de biomasa
• Mejora catalítica de los biocombustibles producidos por pirolisis de biomasa lignocelulósica
• Producción de hidrógeno con captura de CO2 mediante nuevos ciclos de reformado Ca-Cu
• Novel calcium looping CO2 capture process incorporating sorbent reactivation by recarbonation
• Advanced Solid Cycle with Efficient Novel Technologies – ASCENT
• Estrategias de bajo coste en la producción de bioaceites pirolíticos de alta calidad como vector energético
• Nuevos procesos de captura de CO2 con CaO en cementeras
• EMISIONES NEGATIVAS DE CO2 MEDIANTE COMBUSTIÓN DE BIOMASA EN PROCESOS DE CHEMICAL LOOPING
• MULTI-COMP: MULTI-FUNCTIONAL NANOCARBON COMPOSITE MATERIALS NETWORK
• Desarrollo de nuevas terapias y nanobiosensores para el diagnóstico y tratamiento de colitis ulcerosa y cáncer colorectal
• Grupo de Nanoestructuras de Carbono y Nanotecnología. GCNN
• NANOSOL-MAT: Células solares nanoestructuradas fabricadas a partir de disoluciones: materiales innovadores basados en nanoestructuras de carbono y sus composites y híbridos
• StableNextSol. Stable Next-Generation Photovoltaics: Unraveling degradation mechanisms of Organic Solar Cells by complementary characterization techniques
• “ENABLING EXCELLENCE” Graphene-based nanomaterials for touchscreen technologies: Comprehension, Commerce and Communication
• MIRACLE: MIneral RAw materials replacement with nanoComposites by renewabLe Resources Exploitation
• RawMaterials4E-Energy: Raw Materials Solutions for E-Energy Technologies in the European Mobility Industry
• OPTNEWOPT:Materials substitution in optoelectronic devices
• FREECATS: Critical raw materials-FREE CATalystS
• ECO COMBAT: Ecological Composites for High-Efficient Li-Ion Batteries
• SOLAR ASSISTED CATALYTIC REFORMING: AN HYBRID PROCESS TO TRANSFORM MUNICIPAL WASTE INTO ENERGY (PCIN-2015-222)
• DESARROLLO DE CATALIZADORES BASADOS EN GRAFENO PARA PILAS DE COMBUSTIBLE Y ELECTROCATALIZADORES TIPO PEM
• PREPARACION DE NANOMATERIALES CARBONOSOS FUNCIONALIZADOS PARA APLICACIONES ENERGÉTICAS (201480EO20)
• DESARROLLO DE CATALIZADORES BASADOS EN GRAFENOS FUNCIONALIZADOS/DOPADOS Y NANOCOMPOSITES DE GRAFENOS PARA LA CONVERSION ELECTROQUÍMICA DE ENERGÍA (ENE2014-52158-C2-1-R)
• OBTENCIÓN DE BIOCOMBUSTIBLES CON PROPIEDADES MEJORADAS MEDIANTE LA UTILIZACIÓN DE SÍSTEMAS CATALÍTICOS AVANZADOS BASADOS EN NANOMATERIALES DE CARBONO (ENE2014-52189-C2-1-R)
• COMBUSTIÓN DE LÍQUIDOS Y BIOMASA CON CAPTURA DE CO2 MEDIANTE TRANSPORTADORES SÓLIDOS DE OXÍGENO
• ADVANCED COAL CHEMICAL-LOOPING COMBUSTION. AIMING AT HIGHEST PERFORMANCE. (ACCLAIM)
• INDUSTRIAL STEAM GENERATION WITH 100% CARBON CAPTURE AND INSIGNIFICANT EFFICIENCY PENALTY – SCALE UP OF OXYGEN CARRIER FOR CHEMICAL-LOOPING COMBUSTION USING ENVIRONMENTALLY SUSTAINABLE MATERIALS (SUCCESS).

Patents

• Procedimiento de captura de CO2 mediante CaO y la reducción exotérmica de un sólido
• System for CO2 capture from a combustion flue gas using a CaO/CaCO3 chemical loop
• Procedimiento y aparato de termólisis de polímeros de desecho
• Trampa catalítica de hidrocarburos contenidos en las emisiones de un motor de combustión interna
• Aparato basado en un transportador de sólidos y su uso
• Dispositivo y procedimiento para la captura de CO2 por carbonatación de CaO
• Dispositivo para el control de emisiones evaporativas en vehículos a motor procedentes del depósito de combustible
• PROCEDIMIENTO DE CAPTURA DE CO2 MEDIANTE CAO Y LA REDUCCION EXOTERMICA DE UN SÓLIDO
• Patentes
• Catalyst for processing heavy oils and its preparation method.
• Procedimiento de preparacion de nanofibras de grafito a partir de biogás

Staff

• García Sánchez, Francisco José
• Kulakova, Viktoriia
• González Domínguez, José Miguel
• Sanahuja Parejo, Olga
• Hernández Ferrer, Javier
• Plou Gomez, Jorge
• Martínez Berges, Isabel
• Veses Roda, Alberto
• Gómez Usón, Sergio
• Redrado Hernández, Sergio
• Lapieza Remón, Mª Pilar
• Pérez Astray, Anton
• Pérez Vega, Raul
• Millan Lope, Alejandro
• Murillo Villuendas, Ramón
• Díez Martín, Laura
• Santidrián, Ana
• Vallan, Lorenzo
• Istif, Emin
• Víctor Román, Sandra
• Maser, Wolfgang
• Martínez Fernández de Landa, Mª Teresa
• Lemes Pacheco, Giovanni
• Nieto Monge, Mª Jesús
• Luque Centeno, José Manuel
• Frecha Ferreiro, Esther
• Ochoa Bernad, Elba
• Torres Gamarra, Daniel
• Moliner Álvarez, Rafael
• Comas Calmet, Laura
• Mendiara Negredo, Teresa
• Navarro López, M Victoria
• Pinilla Ibarz, José Luis
• Suelves Laiglesia, Isabel
• Tacchini Ciudad, Ignacio
• Rubio Villa, Begoña
• Romera Arnal, Mª Isabel
• Plou Arpa, Azucena
• Muñoz de Miguel, Edgar
• Nicolás, Ciriaco
• Membrado Giner, Luis
• Millán Bueno, Mª del Carmen
• Martínez García, José Ignacio
• Martínez Gil, Pilar
• Mayoral Gastón, Mª Carmen
• López Sebastián, José Manuel
• Lázaro, Antonio
• Lope Aznar, Pilar
• López Cabrero, Araceli
• Lázaro Elorri, Mª Jesús
• Igado Gracia, Cristina
• Izquierdo Pantoja, Mª Teresa
• Grasa Adiego, Gemma
• Hijosa, Sebastián
• Gómez, Olga
• Gracia Ruiz, Ana Cristina
• García Martínez, Tomas
• Gayán Sanz, Pilar
• Gómez Giménez, Carmen
• García Bordeje, José Enrique
• García Labiano, Francisco
• Fustero Escanero, José Enrique
• Gálvez Buerba, Eva Mª
• Fernández Pato, Isaías
• Ferrer Santolaria, Nuria
• Fajés Aznar, Concepción
• Felipe Cisneros, Ana Isabel
• Fernandez Huerta, Natalia
• Domínguez Celorrio, Mª Dolores
• Echegoyen Cirez, Maria Jose
• de Pablo, Fernando
• Díaz Megías, Ana Isabel
• Domingo Regidor Pilar
• de Diego Poza, Luis Francisco
• Benito, Ana M.
• Callén Romero, M Soledad
• Carretero, Elena
• Cebolla Burillo, Vicente Luis
• Aylon Marquina, Elvira
• Andrés García, Chuse Lois
• Andrés Gimeno, José Manuel
• Ansón Casaos, Alejandro
• Abad Secades, Alberto
• Adánez Elorza, Juan